Small cameras.
More possibilities.

Interchangeable CS-mount optics let you select the angle for your installation. A 3.5mm input embeds stereo audio over HDMI, with image settings controlled using VISCA RS-485.

Video travels over 3G-SDI. The RJ45 port provides VISCA over IP control; it does not carry NDI or IP video. The camera also supports RS-485 control and stereo audio embedded over SDI.

A dedicated tri-level genlock input supports synchronized camera systems. CS-mount optics, DC-iris support, stereo audio embedding, and VISCA over IP provide installation flexibility. Network connectivity is for control, rather than IP video.

Video output is network only, with NDI HX2, SRT, RTMP, and RTSP. Select compatible CS-mount lenses for your framing and adjust image settings through the web interface or VISCA over IP.

Simultaneous HDMI and IP video suit installations combining local video equipment with network production. The camera supports NDI HX2, SRT, RTMP, RTSP, and remote image adjustment. Stereo audio is embedded into IP streams.

3G-SDI and NDI HX2/IP outputs combine broadcast cabling with network video. CS-mount lens options and remote camera settings help integrate the camera into fixed installations. Stereo audio is embedded into IP streams.

Supports HDMI and NDI HX3/HX2/IP, interchangeable CS-mount optics, and web-based image settings. High-frame-rate formats depend on the selected output mode and receiving equipment. Confirm your replay or capture system supports the intended format.

Use 20× optical zoom to tighten a shot from a fixed camera position. HDMI, NDI HX2, SRT, RTMP, and RTSP provide video options. This is a box camera: zoom and focus are motorized, while the camera position remains fixed.

A 49mm front thread supports compatible filters and optical accessories. Control zoom and image settings through VISCA over IP or RS-485. Video outputs are HDMI and 3G-SDI; RJ45 provides control rather than IP video.

Manual zoom and focus let you frame the shot during installation. An IP54 housing provides splash and dust protection, and stereo audio can be embedded over HDMI. Protect the breakout connector ends; this is not an IP67 camera.

Network-only video supports NDI HX2, SRT, RTMP, and RTSP. Lens zoom and focus are manually adjusted; image settings can be controlled remotely. The housing is IP54-rated, suitable for protected installations with connector ends kept dry.

Manually adjust and lock the lens using a hex tool for consistent framing. Video output is network only, including NDI HX2, SRT, RTMP, and RTSP. The IP54 housing suits covered installations; protect all connector ends.

Manual zoom and focus can be secured using the supplied hex tool. VISCA over IP or RS-485 adjusts camera settings, while video remains on 3G-SDI. The IP54 housing provides limited environmental protection, and connector ends need protection.

The sealed camera housing is IP67-rated. CS-mount optics, HDMI stereo audio embedding, and VISCA RS-485 provide familiar AIDA features. Maintain the housing seals and protect the breakout connectors during installation.

Video is IP only, including NDI HX2, SRT, RTMP, and RTSP. The housing is IP67-rated with the cap installed; compatible replacement lenses must fit inside it. Keep connector ends protected and install seals as specified.

The weatherproof camera outputs IP video only. Its housing is IP67-rated with the cap installed. High-frame-rate operation depends on streaming mode and receiving equipment; verify the intended format with your capture or replay system.

The small body is IP67-rated with the cap installed. NDI HX2, SRT, RTMP, and RTSP travel over the network; no HDMI or SDI video output is provided. Compatible M12 lenses must fit within the protective cap.

The IP67-rated camera body protects the imaging hardware for outdoor installations. SDI carries Full HD video and embedded audio; RJ45 carries VISCA over IP control. Connector ends must remain protected.

The IP67 housing combines a compact body with 3G-SDI video and stereo audio embedding. VISCA over IP and RS-485 control camera settings. The network connection is for control, and all breakout connectors need protection.

Capture up to 2160p30 over HDMI, with Full HD formats at up to 60fps. CS-mount lenses, DC-iris support, stereo HDMI audio embedding, and VISCA RS-485 provide flexibility for a fixed installation.

The BNC output supports HD, 3G, and 6G-SDI formats, including Ultra HD at up to 30fps. Interchangeable C/CS-mount optics and stereo audio embedding support production integration. Camera control uses VISCA RS-485.

Outputs Ultra HD at up to 30fps over HDMI, with Full HD at up to 60fps. Motorized optical zoom and autofocus provide framing adjustment from a fixed camera location. Control uses VISCA RS-485 or the OSD button.

HDMI and 6G-SDI support Ultra HD at up to 30fps, with stereo audio embedded over SDI. Motorized zoom and autofocus support remote framing adjustments; control uses VISCA RS-485. This model does not provide NDI video.

Simultaneous HDMI and NDI/IP output combines local and network video. Digital pan-and-scan can reframe an HD composition within the captured 4K image. This is digital cropping, rather than mechanical camera movement or optical zoom.

The camera supports HDMI and NDI HX3/HX2/IP outputs, with SRT, RTMP, and RTSP streaming options. Motorized zoom and autofocus provide remote framing from a fixed mounting position. Stereo audio is embedded into IP streams.

An IP67-rated body with the cap installed supports outdoor deployment. Video output is IP only, including NDI HX3/HX2, SRT, RTMP, and RTSP, at up to 2160p60. Digital pan-and-scan reframes within a 4K image. Protect connector ends and maintain seals.